PIAHS | Articles | Volume 381

**Post-conference publication**
01 Aug 2019

**Post-conference publication** | 01 Aug 2019

Initial results of sediment yield measurement interpretation using a regional approach: Southern Italy case study

^{1}Department of Agraria, University Mediterranea of Reggio Calabria, Reggio Calabria, 89122, Italy^{2}CNR – Istituto per I Sistemi Agrari e Forestali per il Mediterraneo, Sezione Ecologia e Idrologia Forestale, Rende (Cs), Italy

^{1}Department of Agraria, University Mediterranea of Reggio Calabria, Reggio Calabria, 89122, Italy^{2}CNR – Istituto per I Sistemi Agrari e Forestali per il Mediterraneo, Sezione Ecologia e Idrologia Forestale, Rende (Cs), Italy

**Correspondence**: Paolo Porto (paolo.porto@unirc.it)

**Correspondence**: Paolo Porto (paolo.porto@unirc.it)

Abstract

Back to toptop
The theoretical TCEV (Two Component Extreme Value) distribution was applied to interpret the sediment yield datasets available in Southern Italy. The analysis is based on hydrological data collected for twelve catchments located in Calabria and Basilicata. A hierarchical approach was used to obtain a regional parent distribution which was used to determine the return time for each event. The hierarchical approach proposed in this study includes two stages. The first stage served for calibration and made it possible to estimate the parameters of the theoretical TCEV distribution. More specifically, the hypothesis of homogeneity with regard to the skewness coefficient and the coefficient of variation was verified using the datasets related to nine catchments. The second stage consisted in verifying the goodness of the theoretical distribution on three independent datasets provided by three experimental catchments not involved in the calibration. Overall results show that, even if the TCEV distribution was conceived to estimate peak flow, its concept of “double component” can be extended to predict sediment yield on a regional scale.

Download & links

How to cite

Back to top
top
How to cite.

Porto, P. and Callegari, G.: Initial results of sediment yield measurement interpretation using a regional approach: Southern Italy case study, Proc. IAHS, 381, 49–54, https://doi.org/10.5194/piahs-381-49-2019, 2019.

1 Introduction

Back to toptop
Prediction of soil erosion and sediment yield, corresponding to a fixed return time, is necessary to adopt soil conservation strategies for reducing costs of on-site and off-site impacts in areas at risk.

In Southern Italy, high rates of soil erosion and sediment yield are well documented both on cultivated land (Porto and Walling, 2012) and in areas covered by forests (Porto et al., 2004). Over the last 60 years, predictions of sediment yield are based both on the use of traditional monitoring techniques, such as observations on experimental plots or catchments, and on different types of models that vary from empirical-parametric approaches, such as SEDD (Ferro and Porto, 2000) or revised versions of the USLE (Cinnirella et al., 1998) to more recent physically- based models, such as WEPP (Nearing et al., 1989), whose goal is to simulate both the detachment and transport of soil particles.

However, even if these models provide good estimates of long-term average values of sediment yield, they cannot make reliable predictions associated to a fixed return time especially if they are associated with extreme events.

A recent study (Porto and Callegari, 2019), carried out on three experimental catchments (W1, W2, and W3) located in Calabria (Southern Italy), demonstrated that a significant proportion of the annual sediment yield in these catchments is due to the extreme event occurred each year which produced more than 50 % of the total annual sediment yield with a very few exceptions.

Looking at the frequency distribution of these measurements of sediment
yield, the same authors showed that the empirical distribution of the
normalized variable ${x}_{i}={\text{SY}}_{\mathrm{MAX},i}/\mathit{\mu}\left(\text{SY}\right)$, where SY_{MAX,i}. is the
maximum annual value and *μ*(SY) is the mean annual value of the entire
monitoring period, is skewed. In particular, results of observation on the
catchment W2 (see Porto and Callegari, 2019) shows that two components can
be identified (Fig. 1). One of them is associated with ordinary events (basic
component) and a second one is characterized by extreme events (outliers
component).

The authors concluded that the process can be represented by two Extreme
Value Type 1 (EV1) independent distributions, one for each component,
capable of associating each event with a corresponding return time *T*. The
double component indicated in Fig. 1 is a well known effect when
studying annual records of maximum peak flow values (see Rossi et al., 1984)
and a more sophisticated approach can be used to explain it.

This approach is based on the TCEV (Two Component Extreme Value) model whose
ability was well demonstrated in predicting peak flow and critical rainfall
corresponding to a fixed return time (see Rossi et al., 1984; Ferro and
Porto, 1999, 2006). The TCEV distribution is based on the
assumption that in each historical sample of the observed variable *x*, one or
several annual maximum values are significantly higher than the bulk of the
remaining data, so that two components are clearly distinguishable.

Therefore, the theoretical CDF of the TCEV law *F*(*x*) can be expressed as a
probabilistic model with four parameters derived from the product of two EV1
distributions:

$$\begin{array}{}\text{(1)}& F\left(x\right)=\mathrm{exp}\left[-{\mathit{\lambda}}_{\mathrm{1}}\mathrm{exp}\left(-{\displaystyle \frac{x}{{\mathit{\theta}}_{\mathrm{1}}}}\right)-{\mathit{\lambda}}_{\mathrm{2}}\mathrm{exp}\left(-{\displaystyle \frac{x}{{\mathit{\theta}}_{\mathrm{2}}}}\right)\right]\end{array}$$

where: *λ*_{1}, *λ*_{2} are the shape parameters and
represent the mean number of events which belong respectively, to the basic
(component 1) and the outlying (component 2) components; and *θ*_{1}, *θ*_{2} are the scale parameters, which represent the
at-site central values of the *x* variable for each component.

The basic component is characterized by a high number of events and by
values of *x* less than those corresponding to the outlying component so that
*λ*_{1}≫*λ*_{2} and
*θ*_{1}≪*θ*_{2}. The main advantage of
the TCEV model, if compared to the EV1 distribution, is based on the fact
that the former can be used at a regional scale because their parameters (or
their combination) showed to be scale invariant for large areas.

In order to apply the model at a regional scale it is useful to introduce the standardized variable $y=\left(\frac{x}{{\mathit{\theta}}_{\mathrm{1}}}\right)-{\mathit{\lambda}}_{\mathrm{1}}$ by which Eq. (1) becomes:

$$\begin{array}{}\text{(2)}& F\left(y\right)=\mathrm{exp}\left[-\mathrm{exp}(-y)-{\mathrm{\Lambda}}_{\ast}\mathrm{exp}\left(-{\displaystyle \frac{y}{{\mathrm{\Theta}}_{\ast}}}\right)\right]\end{array}$$

where: ${\mathrm{\Theta}}_{\ast}={\mathit{\theta}}_{\mathrm{2}}/{\mathit{\theta}}_{\mathrm{1}}$ and ${\mathrm{\Lambda}}_{\ast}={\mathit{\lambda}}_{\mathrm{2}}/{\mathit{\lambda}}_{\mathrm{1}}^{\mathrm{1}/{\mathrm{\Theta}}_{\ast}}$.

Introducing the dimensionless variable *x*^{′}, equal to the ratio between *x* and
the mean value *μ* of the TCEV distribution, Eq. (2) becomes:

$$\begin{array}{}\text{(3)}& F\left({x}^{\prime}\right)=\mathrm{exp}\left\{-{\mathit{\lambda}}_{\mathrm{1}}{\left[\mathrm{exp}\left(\mathit{\alpha}\right)\right]}^{-{x}^{\prime}}-{\mathrm{\Lambda}}_{\ast}{\mathit{\lambda}}_{\mathrm{1}}^{\mathrm{1}/{\mathrm{\Theta}}_{\ast}}{\left[\mathrm{exp}\left({\displaystyle \frac{\mathit{\alpha}}{{\mathrm{\Theta}}_{\ast}}}\right)\right]}^{-{x}^{\prime}}\right\}\end{array}$$

named growth curve, in which:

$$\begin{array}{}\text{(4)}& \mathit{\alpha}={\displaystyle \frac{\mathit{\mu}}{{\mathit{\theta}}_{\mathrm{1}}}}=\mathrm{0.5772}+\mathrm{ln}{\mathit{\lambda}}_{\mathrm{1}}-\sum _{j=\mathrm{1}}^{\mathrm{\infty}}{\displaystyle \frac{(-\mathrm{1}{)}^{j}{\mathrm{\Lambda}}_{\ast}^{j}\mathrm{\Gamma}\left(\frac{j}{{\mathrm{\Theta}}_{\ast}}\right)}{j\mathrm{!}}}\end{array}$$

where Γ() is the gamma function.

For fixed return period *T*, Eq. (3) requires only 3 parameters (Λ_{∗}, Θ_{∗} and *λ*_{1}) for the calculation of the
variable *x*^{′} into a selected area (i.e. conversion of growth curve to
quantile). It is assumed that the first two parameters, Λ_{∗}
and Θ_{∗}, are constant over a very large area and the parameter
*λ*_{1} is considered constant for each sub-region into which the
region is divided. When the three parameters of Eq. (3) are defined and
taking into account of the definition of the dimensionless variable *x*^{′}, the
corresponding value of the variable *x* can be obtained by the following
equation:

$$\begin{array}{}\text{(5)}& x={x}^{\prime}\mathit{\mu}\end{array}$$

where: the variable *μ* (or scale parameter) can be replaced by the
empirical mean of the single records.

Considering the logical dependence of sediment yield on the magnitude of peak flow (see among the others Williams and Berndt, 1977), the aim of this work is to interpret the observed values of sediment yield using an approach based on the TCEV distribution.

2 Materials and methods

Back to toptop
The Italian Hydrographic Service (SIMI) has published long-term measurements of daily and monthly suspended sediment load (SSL) on many catchments throughout the country. In the present contribution, monthly measurements of SSL, which were collected on 11 rivers located in Calabria, and Basilicata, have been used for analysis. This step required also a preliminary aggregation of the data to generate the annual datasets of sediment yield (see Table 1 and Fig. 2 for details).

These datasets have been integrated by 3 long-term records of sediment yield obtained in three experimental catchments (W1, W2, and W3) located in Calabria (see Porto et al., 2004). In this case, the original measurements, collected at event scale, have been aggregated at annual scale to make them comparable with the previous datasets.

More specifically, the 11 datasets were used to derive the growth curve (Eq. 3) for the entire region, here assumed as a unique homogeneous area, while the three catchments W1, W2, and W3 were used to test the validity of the Eq. (3) on independent datasets located in the same region.

In other words, the hierarchical approach proposed in this study consists of
two levels: (1) the first level aimed at calculating the 3 parameters
(Λ_{∗}, Θ_{∗} and *λ*_{1}) of the Eq. (3) on
the area where the catchments are located. In this respect, a comparison
between the empirical and theoretical CDFs of *γ* was performed; (2) the second level served to validate the Eq. (3) on the three independent
datasets for which the empirical CDFs of the variable *x* are available.

3 Results and discussions

Back to toptop
The analysis carried out at the first level required the basic assumption
that the entire region can be considered homogeneous with respect to the skewness coefficient, *γ* and the coefficient of variation, CV (see Fiorentino et al., 1987; Beran et al., 1986).
However, considering the short length of some historical datasets
(*N*<10 years), some preliminary adjustments of these records were
necessary. More specifically, based on geomorphic similitude, the two
datasets of River Agri (see Table 1) were bulked into one single
dataset with *N*=15; the same assumption was made for the two records of
River Esaro for which a final single dataset with *N*=17 was obtained.

As explained above, in the first step of this analysis, the TCEV model
required the estimation of the regional parameters Λ_{∗} and
Θ_{∗} referred to these new nine series. This analysis was
conducted using the procedure suggested by Fiorentino and Gabriele (1985)
that led to the following ML estimates of the two parameters:

$$\begin{array}{}\text{(6)}& {\mathrm{\Lambda}}_{\ast}=\mathrm{0.675};\phantom{\rule{0.25em}{0ex}}{\mathrm{\Theta}}_{\ast}=\mathrm{11.574}\end{array}$$

In order to verify the homogeneity of the entire region with regard to
*γ*, Monte Carlo experiments were performed for generating theoretical
sequences having a fixed size N and distributed according to a TCEV model
with regional parameters given by Eq. (6).

The CDF of the empirical skewness related to the 9 samples and that
generated by the regional model are compared in Fig. 3. The
theoretical CDF was obtained using a Monte Carlo technique based on 20 000
synthetic series having a sample size *N* equal to the mean value calculated
from the empirical datasets.

Even if a perfect overlapping cannot be expected considering the limited number of datasets, Fig. 3 shows a certain ability of the TCEV distribution to reproduce the empirical skewness CDF.

The second step of the analysis is based on the assumption that the
investigated region should be divided into smaller homogeneous areas, named
sub-regions, in which the *λ*_{1} parameter can be assumed
constant. Because the *λ*_{1} parameter is related to CV by the
following equation:

$$\begin{array}{}\text{(7)}& \text{CV}={\displaystyle \frac{\mathrm{0.577}}{\mathrm{log}{\mathrm{\Lambda}}_{\mathrm{1}}+\mathrm{0.251}}}\end{array}$$

this is equivalent to defining sub-regions within which the coefficient of
variation of the individual series can be assumed constant. Unfortunately,
the number of series available in the entire region (9 datasets) is not
enough to proceed with a further geographic subdivision and this hypothesis
could not be considered. In the light of this limitation, the analysis was
carried out considering a unique homogeneous region even at the second
hierarchical level. Consequently, according to Arnell and Gabriele (1988),
the value of Λ_{1} was determined using the TCEV distribution
with the regional values of Λ_{∗} and Θ_{∗} given by
Eq. (6). Using the data obtained from the historical datasets, the
parameters Λ_{1} and *α* assume the following values:

$$\begin{array}{}\text{(8)}& {\mathrm{\Lambda}}_{\mathrm{1}}=\mathrm{5.974};\phantom{\rule{0.25em}{0ex}}\mathit{\alpha}=\mathrm{8.776}\end{array}$$

Figure 4 shows that the growth curve calculated by the Eq. (3), with
the parameters given by the Eqs. (6) and (8) fits very well the higher
values ($f\left({x}^{\prime}\right)>\mathrm{0.5}$) of the *x*^{′} empirical distribution suggesting that
the hypothesis of unique homogeneous region is plausible.

The regional growth curve given by the Eq. (3) with the calibrated values of
the 4 parameters (Λ_{∗}, Θ_{∗} , *λ*_{1} and *α*) was tested on three independent datasets available for
three experimental catchments (W1, W2, and W3) located in Calabria (see Fig. 2). Details of these catchments are reported elsewhere (see Ferro and Porto,
2000). Here, only the CDFs of the empirical variable *x*^{′} are considered and the
comparison with the theoretical distribution is reported for each catchment
in Fig. 5.

The visual inspection of the three graphs in Fig. 5 suggests that,
the model fits reasonably well the higher values ($f\left({x}^{\prime}\right)>\mathrm{0.5}$) of
the *x*^{′} empirical distributions suggesting that the regional growth curve is
very robust and can be used for obtaining reliable predictions even for
large events.

4 Conclusions

Back to toptop
Prediction of sediment yield generated by large events is very important in areas not covered by monitoring stations or for the areas with limited observational periods. Based on a previous contribution by Porto and Callegari (2019), the study presented herein reports a regional investigation carried out in Southern Italy aimed at evaluating the frequency distribution of sediment yield. The procedure applied in this contribution is based on the use of the TCEV model and its hierarchical approach to get reliable estimates of the regional parameters of the distribution. The choice is due to the ability of the TCEV distribution to reproduce the skewed empirical distributions of sediment yield observed in many historical datasets and to generate estimates of sediment yield associated with a fixed return time. Overall, the study demonstrated that even if the TCEV distribution was conceived to provide estimates of peak flow, its basic assumptions and its hierarchical procedure can be used to predict sediment yield at regional scale.

Data availability

Back to toptop
Data availability.

Data collected by the Italian Hydrographic Service (SIMI) can be downloaded from the website http://www.gruppoalluvioni.it/annali-idrologici/ (last access: 1 August 2018). Data related to the catchments W1, W2 and W3 are available upon request to the authors.

Author contributions

Back to toptop
Author contributions.

All authors setup the research, analyzed the results and participated in writing the paper.

Competing interests

Back to toptop
Competing interests.

The authors declare that they have no conflict of interest.

Special issue statement

Back to toptop
Special issue statement.

This article is part of the special issue “Land use and climate change impacts on erosion and sediment transport”. It is a result of the ICCE Symposium 2018 – Climate Change Impacts on Sediment Dynamics: Measurement, Modelling and Management, Moscow, Russia, 27–31 August 2018.

Acknowledgements

Back to toptop
Acknowledgements.

The study has been finalized in the frame of the Erasmus + KA2 – Cooperation for innovation and the exchange of good practices – Capacity Building in the field of Higher Education – Soil Erosion and Torrential Flood Prevention: Curriculum Development at the Universities of Western Balkan Countries/SETOF.

Financial support

Back to toptop
Financial support.

This research has been supported by the European Project SETOF (grant no. 598403-EPP-1-2018-1-RS-EPPKA2-CBHE-JP).

References

Back to toptop
Arnell, N. W. and Gabriele, S.: The performance of the two component extreme value distribution in regional flood frequency analysis, Water Resour. Res., 24, 879–887, 1988.

Beran, M., Hosking, J. R. M., and Arnell, N. W.: Comment on `Two component extreme value distribution for flood frequency analysis', by Rossi et al., Water Resour. Res., 22, 263–266, 1986.

Cinnirella, S., Iovino, F., Porto, P., and Ferro, V.: Antierosive effectiveness of Eucalyptus coppices through the cover management factor estimate, Hydrol. Process. 12, 635–649, 1998.

Ferro, V. and Porto, P.: Regional analysis of rainfall-depth-duration equation for South Italy, J. Hydrol. Eng., 4, 326–336, 1999.

Ferro, V. and Porto, P.: Sediment Delivery Distributed (SEDD) Model, J. Hydrol. Eng., 5, 411–422, 2000.

Ferro, V. and Porto, P.: Floods frequency analysis for Sicily (South Italy), J. Hydrol. Eng., 11, 110–122, 2006.

Fiorentino, M. and Gabriele, S.: Distribuzione TCEV: metodi di stima dei parametri e proprietà statistiche degli stimatori, Geodata n. 25, Cosenza, 1985 (in Italian).

Fiorentino, M., Gabriele, S., Rossi, F., and Versace, P.: Hierarchical approach for regional flood frequency analysis. Regional Flood Frequency Analysis, edited by: Singh, V. P., D. Reidel Publishing Company, Springer, the Netherlands, 2, 39–49, 1987.

Nearing, M. A., Foster, G. R., Lane, L. J., and Finkner, S. C.: A process-based soil erosion model for USDA-Water Erosion Prediction Project Technology, Transactions of the ASAE, 32, 1587–1593, 1989.

Porto, P. and Callegari, G.: A Probabilistic Approach to Interpret Long-Term Observations of Sediment Yield in Experimental Catchments in Southern Italy, in: Climate Change Impacts on Sediment Dynamics: Measurement, Modelling and Management, edited by: Chalov, S., Golosov, V., Li, R., and Tsyplenkov, A., Springer Nature Switzerland AG, Cham, Switzerland, 110–117, 2019.

Porto, P. and Walling, D. E.: Using plot experiments to test the validity of
mass balance models employed to estimate soil redistribution rates from
^{137}Cs and ^{210}Pb_{ex} measurements, Appl. Radiat.
Isotopes, 70, 2451–2459, 2012.

Porto, P., Walling, D. E., and Callegari, G.: Validating the use of caesium-137 measurements to estimate erosion rates in three small catchments in Southern Italy, IAHS Publ., 288, 75–83, 2004.

Rossi, F., Fiorentino, M., and Versace, P.: Two-component extreme value distribution for flood frequency analysis, Water Resour. Res., 20, 847–856, 1984.

Williams, J. R. and Berndt, H. D.: Sediment Yield Prediction Based on Watershed Hydrology, Transactions of the ASAE, 20, 1100–1104, 1977.

Short summary

The paper demonstrates that the theoretical TCEV (Two Component Extreme Value) distribution can be applied to interpret sediment yield datasets available in Southern Italy. The analysis is based on historical records collected in twelve catchments located in Calabria and Basilicata and followed a hierarchical approach to derive a regional parent distribution from which a return time can be associated with each event. The research was carried out to study soil erosion risk at regional scale.

The paper demonstrates that the theoretical TCEV (Two Component Extreme Value) distribution can...

Proceedings of the International Association of Hydrological Sciences

An open-access publication for refereed proceedings in hydrology