Journal cover Journal topic
Proceedings of the International Association of Hydrological Sciences An open-access publication for refereed proceedings in hydrology
Journal topic

Journal metrics

CiteScore value: 0.9
SNIP value: 0.504
IPP value: 0.81
SJR value: 0.296
Scimago H <br class='widget-line-break'>index value: 11
Scimago H
h5-index value: 19
Volume 364
Proc. IAHS, 364, 249–254, 2014
© Author(s) 2014. This work is distributed under
the Creative Commons Attribution 3.0 License.
Proc. IAHS, 364, 249–254, 2014
© Author(s) 2014. This work is distributed under
the Creative Commons Attribution 3.0 License.

  16 Sep 2014

16 Sep 2014

Multi-model ensemble hydrologic prediction and uncertainties analysis

S. Jiang, L. Ren, X. Yang, M. Ma, and Y. Liu S. Jiang et al.
  • State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering, Hohai University, Nanjing 210098, China

Keywords: Input error modelling, parameter optimization, Bayesian model averaging, uncertainty analysis

Abstract. Modelling uncertainties (i.e. input errors, parameter uncertainties and model structural errors) inevitably exist in hydrological prediction. A lot of recent attention has focused on these, of which input error modelling, parameter optimization and multi-model ensemble strategies are the three most popular methods to demonstrate the impacts of modelling uncertainties. In this paper the Xinanjiang model, the Hybrid rainfall–runoff model and the HYMOD model were applied to the Mishui Basin, south China, for daily streamflow ensemble simulation and uncertainty analysis. The three models were first calibrated by two parameter optimization algorithms, namely, the Shuffled Complex Evolution method (SCE-UA) and the Shuffled Complex Evolution Metropolis method (SCEM-UA); next, the input uncertainty was accounted for by introducing a normally-distributed error multiplier; then, the simulation sets calculated from the three models were combined by Bayesian model averaging (BMA). The results show that both these parameter optimization algorithms generate good streamflow simulations; specifically the SCEM-UA can imply parameter uncertainty and give the posterior distribution of the parameters. Considering the precipitation input uncertainty, the streamflow simulation precision does not improve very much. While the BMA combination not only improves the streamflow prediction precision, it also gives quantitative uncertainty bounds for the simulation sets. The SCEM-UA calculated prediction interval is better than the SCE-UA calculated one. These results suggest that considering the model parameters' uncertainties and doing multi-model ensemble simulations are very practical for streamflow prediction and flood forecasting, from which more precision prediction and more reliable uncertainty bounds can be generated.

Publications Copernicus